Examples - HP StorageWorks P9000 Reference Manual

E_ProductID
This displays the PRODUCT information in the SCSI information of the external volume.
E_VOLID
This displays the device identification information in the SCSI information of the external volume
(display in hexadecimal notation).
E_VOLID_C
This displays the PRODUCT information in the SCSI information of the external volume (ASCII
display).
NUM_E_PROTs
This displays the number of alternate paths.
E_PORTs
It enumerates the defined alternate paths.

Examples

If the LDEV number 160 is an external volume, its back-end (RAID Group) information is displayed.
Displaying the information of the LDEV number 640 (V-VOL of Thin Provisioning).
# raidcom get ldev -ldev_id 640
Serial# : 63502
LDEV : 640
SL : 0
CL : 0
VOL_TYPE : OPEN-V-CVS
VOL_Capacity(BLK) : 2181120
NUM_LDEV : 1
LDEVs : 640
NUM_PORT : 1
PORTs : CL2-E-0 14 Linux_X86
F_POOLID : NONE
VOL_ATTR : CVS : VVOL : QS
B_POOLID : 5
LDEV_NAMING : Oracle_data_1
STS : NML
OPE_TYPE : QFMT
OPE_RATE : 70
MP# : 2
Used_Block(BLK) : 218112
TIER_Relocation : Enable
TIER#1(MB) : 1120
TIER#2(MB) : 3000
Description on each column in output example
B_POOL ID
Shows the pool ID to which the LDEV is associated.
Used_Block(BLK)
The number of blocks used in the pool.
TIER_Relocatoin
This displays the status of the relocation setting.
-Enable: The status where the relocation is enabled
-Disable: The status where the relocation is disabled
raidcom get ldev 159