Raidcom Extend Ldev; Syntax; Options And Parameters; Examples - HP StorageWorks P9000 Reference Manual

raidcom delete ldev -grp_opt ldev -device_grp_name grp1

raidcom extend ldev

Extends the capacity of V-VOL for Thin Provisioning/Smart Tiers volume.
If the specified LDEV is not a V-VOL of Thin Provisioning, it is rejected with EX_ENOOBJ.
A device group can also be specified instead of an LDEV.

Syntax

raidcom extend ldev {-ldev_id <ldev#> | -grp_opt <group option>
-device_grp_name <device group name> [<device name>]} -capacity <size> | -offset_capacity <size> | -cylinder
<size>

Options and parameters

Option
-ldev_id <ldev#>
(0-65279)
-grp_opt <group
option>
-device_grp_name
<device group name>
[<device name>]
-capacity <size>
-offset_capacity <size>
-cylinder <size>

Examples

Extending the capacity of a Thin Provisioning V-VOL: 200 by 10 GB.
raidcom extend ldev -ldev_id 200 -capacity 10G
Extending the capacity of a Thin Provisioning V-VOL: 201 by 200 MB.
raidcom extend ldev -ldev_id 201 -capacity 200M
Extending the capacity of Thin Provisioning V-VOL belonging to the device group: grp1 by 200
MB.
raidcom extend ldev -grp_opt ldev -device_grp_name grp1 -capacity 200M

raidcom get ldev

Displays LDEV information.
It displays the information of the specified LDEV or the device file. A device group can also be
specified instead of an LDEV.
154 Configuration setting commands
Description
Specifies an LDEV number (0-65279). Specify LDEVs for Thin Provisioning/Smart Tiers.
For example:
-ldev_id 200
Specifies the device information extracted from the LDEV belonging to the device group. Specify
"ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max. 32 characters)
within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Specifies a capacity to be extended. The unit is g/G, m/M, or k/K. Block (512k) is used if
the specification is omitted.
Example of extension:
1GB (gigabyte) is:
-capacity 1G, -capacity 1g, -capacity 1024M, -capacity 1024m, -capacity 1048576K, -capacity
1048576k, -capacity 2097152
Specifies capacity. Corrects the size. The capacity can be specified in byte or block.
Specifies the size in cylinder unit. When specifying, the unit is g/G, m/M, or k/K. Cylinder
is used if the specification is omitted.