HP P6000 Installation Manual page 20

◦
◦
P6500 EVA controller enclosure should contain:
◦
◦
◦
◦
◦
◦
Each FC disk enclosure should contain:
◦
◦
◦
◦
NOTE:
modules on all FC ports. If you ordered the AF092A rack, HP recommends that you use
the 1.37 meter (minimum length) power cords.
3. Inspect for damage.
If damage is present, contact your local HP representative.
20 Preparing your site
Installation documentation
XCS controller software recovery CD
One 2U controller enclosure with two HSV360 controller modules, two power supply
modules, two fan modules, and two battery modules installed.
Rack mounting hardware
Two 2.0 meter SAS Y-cables
Two power cords
Installation documentation
XCS controller software recovery CD
A minimum of one 2U M6612 or M6625 disk enclosure, two power supply modules,
two fan modules, and two battery modules.
Rack mounting hardware kit
Two 0.7 meter SAS cables
Two power cords
Controllers are shipped with Small Form Factor Pluggable (SFP) transceiver