Status Read Command; Format; Transfer Example; Operation Requirements - Sanyo PLC-XU305A - 3000 Manual

PLC-XU305A/355A Basic Serial Command Specifications

7. Status Read Command

7.1. Format

7.1.1. PC issues commands in format as below;
"CR" Command [CR]
Commandÿ 1 character(See Basic Status Read Command Table)
7.1.2. When a projector receives the appropriate command, it returns a character line as the
required data.
Required Data [CR]
Required Dataÿ A character line(See Basic Status Read Command Table)
7.1.3. When the received data cannot be decoded, the projector returns "?" [CR].

7.2. Transfer Example

Get input mode for projector with basic commands
PC → Projector
Projector → PC

7.3. Operation Requirements

Status Read commands are invalid when the projector is in standby under Eco mode.
Command(issues a command of getting current input mode)
"C" "R" "1" "CR"
Processing
(A few msÿ ^ 1s)
(
Shows Computer 1 is selected)
22/26
"1" "CR"
Response