IMPORTANT SAFETY INSTRUCTIONS Read all instruction before use and keep for future reference. WARNING • Misuse or modification of this appliance may result in breakdown or injury. • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. IMPORTANT INFORMATION •...
FOR SAFETY DO NOT: • Attempt to disassemble this unit or carry out repairs. • Attempt to modify the unit in any way. • Make sure that foreign objects do not get inside the unit. • Place naked flame sources - such as lit candles on or near the unit. •...
REMOTE CONTROL POWER SOURCE Numerical Keys PRE CH VIDEO YPbPr HDMI YPbPr MUTE Vol + - VIDEO ADJ DUAL AUDIO ADJ SLEEP DUAL ZOOM CURSOR MENU INFO /EXIT INFO MENU/EXIT Yellow Button Green Button CH-LIST USB FREEZE Blue Button Red Button SIZE SUBPAGE TELETEXT...
Page 6
NOTES: Please read the important safety instructions before use. fig. 1 REMOTE CONTROL 1. Unclip the Battery Cover from the Remote Con- trol. See fig. 1. 2. Insert two new 1.5V size AAA Batteries with the + and – marks correctly aligned. See fig.
Page 7
3. Carefully close the Battery Cover. See fig. 3. PRECAUTIONS: To obtain the best performance from your remote control, please consider the follow- ing: fig. 3 • Ensure there is no obstruction between remote control and TV set. • Bright sunlight may affect the remote control performance.
KNOW YOUR MACHINE 1 x LCD TV Front View Side Connections Control Panel Rear View Rear Connections A Power LED: If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby mode. B Wall Mount Hole: For wall mount use only.
Page 9
G CH +: Press to go to the next higher channel. In Menu mode, functions as the up arrow. H CH -: Press to go to the next lower channel. In Menu mode, functions as the down arrow. Power Button: Use this button to switch your LCD TV on/off. J Common Interface Slot: Function when PC Card or ExpressCard is in COMMON INTERFACE slot of the set.
WALL MOUNTING NOTES: Please read the important safety instructions before use. WALL MOUNTING (Optional) IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs supplied are suitable for supporting the unit. Consult a qualified tradesperson if you are not sure.
Page 11
3. For the Wall Bracket - Refer to the user instructions supplied with the wall bracket (not included). See fig. 7 VESA-Compatible TV Screen Wall bracket Screw Type Size (inches) (W x H mm) 32” 200 x 200 mm Metric 4 x 14 mm fig.
ANTENNA CONNECTION WARNING: Switch off the TV before connecting any external device. CONNECTING THE ANTENNA fig. 8 1. Connect the Antenna Plug to the Antenna Input T located at the rear of the TV. See fig. 8. 2. For optimum picture quality, adjust antenna direction if needed.
TUNING MENU OPTIONS TURN ON THE LED LCD-TV 1. When the POWER I is pressed, the TV will be turned on and the Power LED A on the front of the TV will change from red to blue. See fig. 9. 2.
3. Use Up or Down Cursor to select your language. Then press Right Cursor or OK Button to con- tinue. MENU INFO See fig. 12, 13. /EXIT fig. 12 Initial Setup Language Please select your language: English Deutsch 4. Use Up or Down Cursor to select Français Italiano...
OTHER CONNECTIONS WARNING: Switch off the TV before connecting any external device. SCART INPUT To connect external devices such as DVD players, set top boxes or games consoles. SCART1 SCART 2 1. Plug the scart lead from the external device into TV SCART fig.
Page 16
YPbPr INPUT For connecting devices such as video cameras. 1. Make sure that the power of the LED LCD-TV and the AV device are off. 2. Connect the (Y, Pb, Pr) cables and audio cables to the Compo- nent and Audio Input R on the See fig.
Page 17
VGA INPUT You can use your LED LCD-TV as a monitor for your personal computer. 1. Connect the D type 15-pin VGA interfacecable (not supplied) to VGA Input Q on the LED LCD-TV. See fig. 22. 2. Connect the audio cable (not sup- fig.
Page 18
AV INPUT For connecting an AV device. 1. Make sure that the power of the LED LCDTV and the AV device are off. 2. Connect the audio cables from the AV device’s output jacks to the Audio Input K . See fig.
Page 19
COMMON INTERFACE SLOT You can use a Conditional Access Module (CAM) card to view a Pay TV. 1. Insert the CAM card (not included) in Common Interface Slot J . See fig. 26. 2. Please refer to the COMMON IN- TERFACE section for more detailed information.
BASIC OPERATION SELECT SOURCE • Press the POWER to turn on the LED LCD-TV. Then press HDMI , YPbPr , VIDEO , PC SOURCE to select the source. See fig. 27. AUDIO CONTROL YPbPr • Press the Vol+ to increase the Volume or Vol- to decrease the Volume.
Page 21
AUDIO ADJ • Press AUDIO ADJ to set the LED LCD TV to a predefined sound set- ting.Music/ Speech/ Personal. See fig. 28. SELECT TV CHANNEL • You can use the Number Keys YPbPr the remote control to directly select TV channels.
• Press EPG to display electronic program guide in TV mode. See fig. 29. CHANNEL LIST • Press CH-LIST to display a list of channels. YPbPr See fig. 29. SLEEP • Press SLEEP to turn the LED LCD TV off after a preset time. See DUAL fig.
Page 23
FAVOURITE LIST • Press FAV to display the Favourite list. You can save your favourite channels in the Favou- CH-LIST USB FREEZE rite List. See fig. 30. SUBTITLE fig. 30 • Press SUBTITLE to turn the subtitle On or Off. See fig. 30. •...
MENU OPERATION OSD SETTING 1. Press MENU D or to enter fig. 31 the OSD setting. There are five items in the list: Picture, Sound, TV, Features and Parental. YPbPr fig. 32 See fig. 31, 32 and 33. 2. Use the Up or Down Cursor DUAL to select and press OK confirm your choice.
Picture Smart Picture Picture Smart Picture Standard Brightness Sound - To set the LED LCD TV to a predefined Contrast Colour picture settings. Use the Left or Right Tint Features Sharpness Cursor to select from Standard, Vivid, Parental Colour Temperature Cool Advanced Control Movie, Eco, or Personal.
Backlight To make the background brighter or Picture Sound Mode Personal darker.See fig. 34-1. Equalizer 120Hz Sound Equalizer 500Hz DCR. Equalizer 1.5KHz Equalizer 5KHz Dynamic Contrast Ratio (DCR) auto Features Equalizer 10KHz adjusts the brightness of the screen Balance Parental Virtual Surround to show more depths in the darker Digital Audio Out...
Page 27
Digital Audio Out To select the Digital audio out. Use the Left or Right Cursor toggle between Off, Dolby Digital and PCM. Tip: When Dolby Digital is select- ed, make sure the amplifier sup- ports digital audio.See fig. 36. SPDIF Delay The NorDig HD IRD shall support the possibility to adjust the audio-delay on the SPDIF output (if available) up...
The following functions are only avail- able for digital channels with audio Picture SPDIF Delay signals. Sound Type Normal Audio Description Type Features Parental This function enables you to choose the type of the additional narration Select Back EXIT during the TV watching. fig.
Country Picture Country Germany 1st Audio English Sound 2nd Audio English To select the relevant country. Channels This is the country you are in, or the Features country whose channels you want to Parental receive if you live near its borders. See fig.
Update Scan 1. Use the Up or Down Cursor Picture Scan single RF channel.(Digital Only) Sound select Update scan in the Channels submenu. Features 2. Press the Right Cursor RF Channel Parental Signal Strength start searching the local program Signal Quality Good automatically.
Channel Sort 1. Use the Up or Down Cursor select Channel sort in the Chan- nels menu. 2. Press the Right Cursor to enter MENU INFO it and use the Up or Down Cursor /EXIT to highlight a program you want to sort and press the OK to set.
Page 32
Decoder (Analog only) Channel Decode support the Canal+ (paid television channel); however, the channel also broad- cast some un-encrypted programs. These programs without encryption can be viewed free of charge. 1. Use the Up or Down Cursor to select Decoder in the Chan- nels submenu.
Features Menu Language Picture English Menu Language Picture Format Wide Sound To select the on-screen display Time Features Subtitle menu language. Teletext Language Parental Common Interface See fig. 48 and 49. HDMI Scan Info Auto Reset Default Picture Format Select Exit EXIT Auto: DTV and HDMI input will...
Subtitle Use the Up or Down Cursor Picture Menu Language English Picture Format Wide Sound toggle between : Time Features Subtitle • Analog Subtitle: To display Teletext Language Parental Common Interface the transmitted subtitle on the HDMI Scan Info Auto Reset Default screen.
Page 35
HDMI Scan Info (HDMI only): When you use HDMI mode, you can choice the follow mode.See fig. 51. Automatic: Set to underscan or overscan automatically when the video signal is detected. Underscan: When the video signal is detected, all active pixels and lines are displayed with or without border.
Parental This function blocks channels or pro- Picture Channel Block grams that you do not want to or that Parental Guidance Sound Input Block you do not want your children to watch. Set Password Clear All A password is required to gain access to Features Parental this function.
TELETEXT TELETEXT (Designed for Europe PAL/SECAM/ DVB-T systems only) TELETEXT Press TELETEXT to activate Teletext. Press again to turn off Teletext. See fig. 56. MENU Press MIX to activate Teletext INFO /EXIT overlaying the TV picture. See fig. 56. SIZE Press SIZE to change the screen size: Full screen, Top half and Bot-...
Page 38
HOLD Press HOLD to stop the scrolling of tinue pages, press again to con See fig. 57. REVEAL MENU Press REVEAL to display hidden INFO /EXIT information such as answers to a quiz and MHEG CANCEL function. See fig. 57. R/G/Y/B (Colour button) Press Colour Buttons , and...
COMMON INTERFACE MODULE Common Interface Module The Common Interface CI Slot J , is designed to accept the Condi- Smart Card tional Access CA Module coupled with a Smart card, in order to view pay TV programmes and additional CA Module services.
Page 40
3. Select Common Interface to view the menu options and information Picture on the inserted CI card. Menu Language English Picture Format Wide Sound See fig. 62. Time Subtitle Teletext Language Features Common Interface Parental Reset Default Enter Select Exit EXIT fig.
OAD OPERATION OAD for Software Update function: Over Air Download Software ID : XXXXXXXX A New Version of software is detected.Do you want to upgrade 1. When you get the updating news from the TV shop’s web, you can update the opera- Accept Remind me Later tion software using the Download menu.
TROUBLESHOOTING The following table contains common problems and the solutions to these problems. Please check this list before you contact technicians. Problems Sloutions No picture 1. Connect power cord correctly. 2. Turn on power. 3. Connect signal cable correctly. 4. Press any button on the LED LCD TV. Abnormal colours Connect signal cable correctly.
APPENDIX (1) VGA support format 32” Item H.Freq. (KHz) Mode Resolution V.Freq. (Hz) 1366 x 768 31.469 IBM VGA 640 x 350 70.086 31.469 IBM VGA 720 x 400 70.087 31.469 IBM VGA 640 x 480 59.94 MACINTOSH 640 x 480 37.861 VESA 640 x 480...
Page 45
HDMI (High Definition Multimedia Interface) support format Support 480i /480p, 576i/576p, 720p, 1080i, 1080p format with HDCP. Digital interface with 4 channels TMDS signal. Scart input/output description Scart1:SCART input / output -Full SCART, includes RGB in , CVBS ( audio L/R ) in/ ( TV out ). Scart 2:Scart input/output -Half SCART, includes S-Video in , CVBS( audio L/R ) in/ ( Moni- tor out ) Screen Display Source...
INFORMATION CE marking The shipped version of this device complies with the requirements of EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive” WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
Page 47
Notes P.46 BUSH | HD Ready LED LCD | User Manual | Customer Helpline 0845 604 0105...
PRODUCT GUARANTEE PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of Year This product is guaranteed for twelve months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will either be replaced, refunded or repaired free of charge where possible during this period by the dealer from whom you purchased the unit.