Advertisement
Channel Edit
1. Press MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
/
press
to select Channel menu.
/
2. Press
to select the Channel Edit option, and
then press
to enter submenu.
/
Search: Press
to select the Manual Search
option, and finally press
Upon finding a program, the search will automatically
stop, and the program will be stored onto the current
channel. You may stop the search by pressing OK or
MENU.
/
Fine Tuning: Press
option, and then press
tuning until obtaining a relatively good picture effect.
The fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a certain
program is not good enough. Normally, the optimal
picture effect can be obtained without fine tuning when
watching TV programs, and fine tuning is to meet the
need of adjusting a certain program.
Color system: Press
Systems option, and then press
color system.
The TV is designed with three systems for your choice,
i.e. Auto, PAL , SECAM and NTSC. Generally, the
system is set as Auto and it is not necessary to make
an adjustment. The system is normally set as Auto
during auto search.
Sound system: The TV is designed with four systems
for your choice, i.e. DK, M, BG and I. Generally, it is not
necessary to adjust the system. The system is normally
set as DK during auto search.
Skip: When the skip is set ON, the channel will be
skipped when pressing P
selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press
to set Skip as Off.
/
to start manual search.
to select the Fine Tune
/
to start UP or DOWN fine
/
to select the Color
/
to select correct
or P
and only can be
menu
Channel Edit
Auto Search
Exchange
menu
Channel Edit
Manual Search
874.25MHz
Fine Tune
20
Color System
Auto
Sound System
DK
Skip
ON
Advertisement
