Download Print this page

HP LaserJet Pro M275nw Clearing Paper Jams

Laserjet pro 200 color mfp m275nw clear jams.
Hide thumbs
   

Advertisement

LASERJET PRO 200
COLOR MFP M275nw
Clear jams
Jam locations
Jams can occur in these locations:
3
1
Output bin
2
Rear door
3
Input tray
Loose toner might remain in the product after a jam. This problem typically resolves itself after a few sheets have
been printed.
© 2011 Copyright Hewlett-Packard Development
Company, L.P.
2
1

Advertisement

   Summary of Contents for HP LaserJet Pro M275nw

  • Page 1: Clear Jams

    Jams can occur in these locations: Output bin Rear door Input tray Loose toner might remain in the product after a jam. This problem typically resolves itself after a few sheets have been printed. © 2011 Copyright Hewlett-Packard Development Company, L.P.

  • Page 2: Clear Jams From The Input Tray

    Clear jams from the input tray Remove the paper from the input tray. With both hands, grasp the paper, and carefully pull it free from the product. NOTE: If the sheet tears, remove all fragments before continuing. Do not use sharp objects to remove fragments.

  • Page 3

    Remove the capture stage and set it aside. Open and close the print cartridge door to reset the product. © 2011 Copyright Hewlett-Packard Development Company, L.P.

  • Page 4: Clear Jams From The Output Bin

    Reinstall the capture stage. Lower the camera arm. NOTE: Lower the camera arm to protect the camera lens cover from damage. Clear jams from the output bin Raise the camera arm to the fully open position. LASERJET PRO 200...

  • Page 5

    Remove the capture stage and set it aside. With both hands, grasp the paper, and carefully pull it free from the product. NOTE: If the sheet tears, remove all fragments before continuing. Do not use sharp objects to remove fragments. © 2011 Copyright Hewlett-Packard Development Company, L.P.

  • Page 6: Clear Jams From The Rear Door

    Reinstall the capture stage. Lower the camera arm. NOTE: Lower the camera arm to protect the camera lens cover from damage. Clear jams from the rear door Open the rear door. CAUTION: The fuser is located above the rear door, and it is hot. Do not attempt to reach into the area above the rear door until the fuser is cool.

  • Page 7

    With both hands, grasp the paper, and carefully pull it free from the product. NOTE: If the sheet tears, remove all fragments before continuing. Do not use sharp objects to remove fragments. Close the rear door. © 2011 Copyright Hewlett-Packard Development Company, L.P.

Comments to this Manuals

Symbols: 0
Latest comments: