You can store up to 6 contacts in the preset
• If your cellular phone supports PBAP (Phone
Book Access Profile), you can select a phone
number from the phonebook or call history.
• Disconnecting the power supply lead will erase
all the contacts in the preset dial.
Select a phone number that you want to
store in the preset dial, from the
phonebook, call history* or by
inputting the phone number directly.
The phone number appears in the
display of this unit.
* For the call history, you can also select from
the caller name. In this case, the caller name
appears in the display of this unit.
Press and hold a number button (
to ) to select the preset number to
store until "MEM" appears.
The contact is stored in the selected
Voice dial activation
You can activate voice dialing with a cellular
phone connected to this unit by saying the
voice tag stored on the cellular phone, then
make a call.
Press and rotate the control
dial until "VOICE DIAL" appears, then
Say the voice tag stored on the cellular
Your voice is recognized, and the call is
• Check that the unit and cellular phone are
• Store a voice tag on your cellular phone
• If you activate voice dialing with a cellular
phone connected to this unit, this function may
not always work in some cases.
• Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone's recognition function. For details, see
the support site on the back cover.
Store voice tags while seated in the car, via this
unit with "BT PHONE" source selected.
While connecting a cellular phone to this
unit, the SMS indicator informs you of any
incoming or unread SMS messages.
If you receive a new SMS message, the SMS
If there are any unread SMS messages, the
SMS indicator stays lit.
Function of the SMS indicator may depend on
the cellular phone.