Paging - Brother MFC-J835DW Advanced User's Manual

Chapter 4
IMPORTANT
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
k
Press Stop/Exit.

Paging

When you choose Paging, your machine
dials the cell phone or pager number you
have programmed. This activates your cell
phone or pager so you will know that you
have a fax message in the memory.
If you have set Paging, a backup copy of the
received fax will automatically be printed at
the machine.
a
Press Menu.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive.
g
Press Memory Receive.
h
Press Paging.
16
i
Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
j
Do one of the following:
 If you are programming your cell
phone number and do not need to
enter a PIN, press OK.
If your pager needs a PIN, enter the

PIN, press #, press Pause, and then
enter your fax number followed by
# #.
Press OK.
4
For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7
8 9 # #
 If you do not need a PIN, press:
Pause, and then enter your fax
number followed by # #. Press OK.
For example, press:
Pause 1 8 0 0 5 5 5 6 7 8 9 # #
k
Press Stop/Exit.
Note
You cannot change a paging number or
PIN remotely.