Manual Hardware Installation - D-Link DCS-6010L User Manual

Section 2: Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard.
Connect the Ethernet Cable
Using the pre-attached Ethernet cable connect the free end to your network.
To use a longer ethernet cable or install a coupling adaptor, or see "Internal Ports"
on page 8 for more details. for how to change the Ethernet cable.
Attach the External Power Supply
Attach the external power supply to your wall outlet or power strip.
1 Ethernet Cable
2 Power Cable
D-Link DCS-6010L User Manual

Manual Hardware Installation

Pre attached Ethernet cable
Pre attached power cable.
1
2
22