Step 3: Select The Horn Dispersion Orientation - Electro-Voice Zx1i-100 Owner's Manual

Step 3: Select the horn dispersion orientation– If necessary
For the 90° x 50° horn version you may elect to rotate the horn assembly for more
effective coverage depending on the orientation of the speaker cabinet in your
installation. The horn is factory-installed with the 90° coverage in the horizontal plane
and the 50° coverage in the vertical plane as shown in Figure 8 below.
To rotate the horn follow the steps below:
1. Remove the logo badge to expose grille mounting screws.
2. Remove the grille assembly – see illustration
3. Remove the screws holding the horn assembly in place. – see illustration
4. Rotate the horn assembly 90°.
5. Secure the horn assembly back to the baffle with the horn mounting screws.
6. Secure the grille assembly to the baffle with grille mounting screws.
7. Secure the logo badge back onto the grille.
90° x 50°
Horn
Logo Badge
Figure 8: Horn Rotation (90° x 50° Models Only)
®
Electro-Voice
Assembly
Grille Mount
Screws
Zx1i Owner's Manual
Horn Mount
Screws
Grille
Enclosure
7