Error After Cartridge Replacement; Printing Is Slow - Epson WF-2520 User Manual

2. Right-click your product name, select Printing Preferences, and select your product name again if
necessary.
3. Click the Maintenance tab.
4. Click the Speed & Progress or Extended Settings button.
5. Select Enable EPSON Status Monitor 3, then click OK.
6. Click the Monitoring Preferences button.
7. Click the Shortcut Icon box.
8. Click OK to close the open program windows.
Parent topic:

Error After Cartridge Replacement

If you see an error light or error message after you replace an ink cartridge, follow these steps:
1. Make sure the print head is in the ink cartridge replacement position. (The ink cartridge holder should
be beneath the cutout in the product case, allowing access to the cartridges.)
Note: If the print head is not in the correct position, press the
arrow buttons to select Maintenance, press the up or down arrow buttons to select Ink Cartridge
Replacement and press the OK button to move it to the ink cartridge replacement position.
2. Remove and reinsert the ink cartridge you replaced, making sure to push it all the way into its slot.
3. Complete the ink cartridge installation steps.
Parent topic:
Related topics
Replacing Ink Cartridges

Printing is Slow

If printing becomes slow, try these solutions:
• Make sure your system meets the requirements for your operating system. If you are printing a high-
resolution image, you may need more than the minimum requirements. If necessary, increase your
system's memory.
• If you are using Windows 7, close the Devices and Printers window before you print.
• Clear space on your hard drive or run a defragmentation utility to free up existing space.
Solving Problems Printing from a Computer
Solving Problems Printing from a Computer
Menu button, press the up or down
228