Fax Report Options - Epson WF-2520 User Manual

Setting
DRD
ECM
Fax Speed
Rings to Answer
Dial Tone Detection
Parent topic:

Fax Report Options

Select the fax report or list you want to print.
Options
All
Single
Double
Triple
Double&Triple
On
Off
Fast(33,600bps)
Medium(14,400bps) Transmits faxes at 14.4 Kbps
Slow(9,600bps)
1 to 9
On
Off
Setting Up Fax Features Using the Product Control Panel
Description
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this
service, select the number of rings for your fax
number as the DRD setting so your product can
receive faxes on the correct number of rings. All is
the default setting and works for phone lines that do
not use this service.
Turns on Error Correction Mode (ECM) to
automatically request retransmission of faxes
received with detected errors (default setting).
Turns off Error Correction Mode (ECM).
Transmits faxes at 33.6 Kbps (default setting)
Transmits faxes at 9.6 Kbps
Sets the number of rings before your product
receives a fax. The default setting is 4. If Auto
Answer is turned on and an answering machine is
connected to the product, make sure this setting is
set higher than the number of rings your answering
machine is set to answer a call.
Automatically dials the phone number you enter to
send a fax when the product detects a dial tone on
the line.
Turns off automatic dial tone detection. This is
necessary if you connected your product to a phone
line on a Private Branch Exchange (PBX) or
Terminal Adapter (TA) system.
143