Picture; Adjust - NEC MultiSync V462 User Manual

Setting

PICTURE

BACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust.
CONTRAST Adjusts the image brightness in relationship to the input signal. Press + or - to adjust.
Note: When sRGB is selected in picture mode, this function cannot be changed.
SHARPNESS Adjusts the crispness of the image. Press + or - to adjust.
BRIGHTNESS Adjusts the image brightness in relationship to the background. Press + or - to adjust.
Note: When sRGB is selected in picture mode, this function cannot be changed.
HUE Adjusts the hue of the screen. Press + or - to adjust.
Note: When sRGB is selected in picture mode, this function cannot be changed.
COLOR Adjusts the color depth of the screen. Press + or - to adjust.
Note: When sRGB is selected in picture mode, this function cannot be changed.
COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the screen
reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further
adjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/B
levels, CUSTOM must be showing as the COLOR TEMP selection.
Note: When sRGB is selected in picture mode, predefi ned 6500k is set so it cannot be changed.
When PROGRAMMABLE is selected in GAMMA CORRECTION, this function cannot be
changed.
COLOR CONTROL Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta.
Note: When sRGB is selected in picture mode, this function cannot be changed.
GAMMA CORRECTION Select a display gamma for best picture quality.
Note: When sRGB is selected in picture mode, this function cannot be changed.
NATIVE Gamma correction is handled by the LCD panel.
2.2 Typical display gamma for use with a PC.
2.4 Good for video (DVD, etc.)
S GAMMA Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the
image (S-Curve).
DICOM SIM. DICOM GSDF curve simulated for LCD type.
PROGRAMMABLE A programmable gamma curve can be loaded using NEC optional software.
MOVIE SETTINGS
NOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust.
VIDEO1, VIDEO2, S-VIDEO inputs only
TELECINE Automatically senses the sources frame rate for optimal picture quality.
HDMI, DVD/HD, SCART, VIDEO1,
VIDEO2, S-VIDEO inputs only
ADAPTIVE CONTRAST Sets the level of adjustment for dynamic contrast.
HDMI, DVD/HD, SCART, VIDEO1,
VIDEO2, S-VIDEO inputs only
PICTURE MODE Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB] or [CINEMA]. See page 19.
RESET Resets the following settings within the PICTURE menu back to factory setting: BACKLIGHT,
CONTRAST, SHARPNESS, BRIGHTNESS, HUE, COLOR, COLOR TEMPERATURE,
COLOR CONTROL, GAMMA CORRECTION, MOVIE SETTINGS.

ADJUST

AUTO SETUP Automatically adjusts Screen Size, H position, V position, Clock, Phase and White Level.
VGA, RGB/HV inputs only
AUTO ADJUST H Position, V Position and Phase are adjusted automatically when new timing is detected.
VGA, RGB/HV inputs only
H POSITION Controls the horizontal position of the image within the Display area of the LCD.
All inputs except DVI, HDMI, DPORT
Press + to move right. Press - to move left.
V POSITION Controls the vertical position of the image within the Display area of the LCD.
All inputs except DVI, HDMI, DPORT
Press + to move up. Press - to move down.
CLOCK Press + to expand the width of the image on the right of the screen.
VGA, RGB/HV inputs only
Press - to narrow the width of the image on the left.
PHASE Adjusts the visual "noise" on the image.
VGA, RGB/HV, DVD/HD, SCART inputs only
*: depends on signal input
English-21
Default
70
50
50*
50
50
50*
10000K
0
NATIVE*
(except sRGB
setting)
6*
AUTO*
OFF
STANDARD
-
-
OFF
-
-
-
-