Download  Print this page

Getting Started - Kenwood KMR-700U Instruction Manual

Marine ipod/usb receiver.
Hide thumbs

Advertisement

,
Getti·'ngStarted
Connecting iPod
or
USB device
------
~
~
• Keep the unused terminal in the terminal cover to
avoid being damaged.
Q
~
~!~C!.v.!.'!.g
iPod
or
USB device
Be sure to use the cushion bag which protects iPod or
USB device against shock.
Do not overload the opened faceplate If you do so,
the faceplate may be damaged.
6
Close the faceplate.
1
Enter Remove mode
Press the [iPod] button for at least 2 second.
"REMOVE" is displayed.
2
Select the device to be removed
Select the device to be removed by turning
the [VOL] knob, and press the [ENTER] button.
3
Turn the [VOL] knob to select "YES': and then
press the [ENTER] button.
4
Press the Release button.
Pull the faceplate open, while supporting it with
your hand.
5
Remove the device.
Only the device selected in step 2 can be
removed.
Cancelling the Remove
mode
Press the [iPod] button for at least 1 second.
Release button
~-'lll_
Terminal cover
1
Press the Release button.
Pull the faceplate open, while supporting it with
your hand.
2
Remove the terminal cover.
3
Pull out the terminal to be used, and then
replace the terminal cover.
~
4
Connect iPod and USB device to the terminal.
5
Insert the connected iPod and USB device into
the cushion bag (accessory), and place it on
the terminal cover.
4
I
KMR-700U

Advertisement

Table of Contents

   Related Manuals for Kenwood KMR-700U

   Related Content for Kenwood KMR-700U

Comments to this Manuals

Symbols: 0
Latest comments: