Download  Print this page

Dual Zone Control; Other Functions; Backup Memory Delete - Kenwood KMR-700U Instruction Manual

Marine ipod/usb receiver.
Hide thumbs

Advertisement

Audio Adjustments
Dual zone control
Connecting USB or iPod to the unit when the
dual zone function is set to on, the front and rear
channels are switched to the USB/iPod source.
1
Enter Dual zone control mode
Press the [2Z0NE] button.
2
Switch Dual Zone
ON/OFF
Turn the [VOL] knob.
To switch the dual zone function to ON, select
"2Z0NE: ON':
3
Select the channel to set the source
Press
['V]
button, and then press [«] or ["]
button.
Select the channel with
[<<1
or
["J
button.
4
Select the source
Turn the [VOL] knob.
S
Exit Dual zone control mode
Press the [2Z0NE] button.
~
• Adjust the volume of Front channel by [VOL] knob.
• Adjust the volume of Rear channel by <Audio Control>
(page 14).
• The Audio Controls have no effect on the rear source.
• When iPod or USB source is selected for the front channel,
only the same selection is available for the rear channel.
For example, when iPod is selected for the front channel,
only iPod can be selected for the rear channel, and not the
USB.
• When the dual zone function is set to ON, you can
control the front channel by using the remote control
KCA-RC107MR (optional accessory).
You can also allow the rear channel to be controlled by
remote control.
16
I
KMR-700U
Other Functions
Backup memory delete
Initializes the settings of "MENU'; etc.
1
Enter Menu mode
Press the [
0. ]
button for at least
1
second.
"MENU" is displayed.
2
Select Backup memory delete item
Select the "Backup MEM DEL" display.
For how to select Menu items, refer to <Menu
System> (page 8).
3
Enter Backup memory delete mode
Press the [ENTER] button for at least 1 second.
"Backup MEM DEL?" is displayed.
4
Delete the Backup memory
Turn the [VOL] knob to select
"YES'~
and then
press the [ENTER] button.
"Reboot" is displayed and the unit reboots.

Advertisement

Table of Contents

   Related Manuals for Kenwood KMR-700U

Comments to this Manuals

Symbols: 0
Latest comments: