Listening To The Other External Components; Function Settings - Kenwood KDC-252U Instruction Manual

Listening to the other external
components
Preparation: Make sure [ON] is selected for [BUILT-IN AUX}I [BUILTIN AUX]. (page 8)
1 Press(!) SRC to select "AUX."
2 Turn on the external component and
start playing.
3 Turn the volume knob to adjust the
volume.
.
:
. . .
.
. .
Portable audio device
(commercially available)
3.5 mm (1/8") stereo mini plug
(commercially available)
Function settings
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CONTROL]
I
[AUDIO CTRL] or [SETIINGSL then
press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
• See the following table for selection.
• Repeat step 3 until the desired item is selected/activated.
•
Press ~
to return to the previous item.
4
Hold~
to finish the procedure.
[AUDIO CONTROL]
I
[AUDIO CTRLl : While listening to any source except in STANDBY state ...
Item
I
Selectable setting (Preset:*)
SUB-W LEVEL - 15 -
+
15 (Preset 0): Adjusts the subwoofer output level.
BASS LEVEL - 8- +8 (Preset 0): Source tone memory: Adjusts the level to memorize in each source. (Before
MID LEVEL making an adjustment, select the source you want to adjust.)
TRE LEVEL
14