Dell S320 User Manual page 57

The image settings menu provides the following options:
VGA O
UTPUT
standby status. Default is Off.
D S (
ISPLAY ETTINGS
The display settings menu provides the following options:
H
ORIZONTAL
the image left.
V P
ERTICAL OSITION
image down.
F —Allows you to change the display data clock frequency to
REQUENCY
match the frequency of your computer's graphics card. If you see a vertical
flickering wave, use the Frequency control to minimize the bars. This is a
coarse adjustment.
T —Synchronize the phase of the display signal with the graphic
RACKING
card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
A R
SPECT ATIO
appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
—Select On or Off the VGA output function at projector
PC M )—Select and press
IN ODE
P —Press
OSITION
—Press
—Allows you to select the aspect ratio to adjust how the image
to activate display settings.
to move the image right and
to move the image up and
Using Your Projector
to move
to move the
57