North Bridge Configuration - Asus P5K-V - Motherboard - ATX User Manual

North Bridge Configuration

Advanced
North Bridge Chipset Configuration
Memory Remap Feature
Initiate Graphic Adapter
Internal Graphics Mode Select
PEG Port Control
PEG Port Force x1
Video Function Configuration
ASUS C.G.I. Function
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD]
[PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to decide whether to use the internal graphics device and select
the amount of memory used by the device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
Set this item to [Disabled] if you intend to install a PCIE x16 graphics card to the
primary (blue) PCIE x16 slot.
PEG Port Control [Auto]
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
This item appears when the PEG Port Control item is set to [Auto].
Configuration options: [Enabled] [Disabled]
The following item appears when the Internal Graphics Mode Select item is
set to [Enabled, 1MB] or [Enabled, 8MB].
ASUS P5K-V
BIOS SETUP UTILITY
[Enabled]
[PEG/PCI]
[Enabled, 8MB]
[Auto]
[Disabled]
[Auto]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4-23