Data Types - Lexmark T656 Technical Reference Manual

5
RFID Support
Through LFJT (Lexmark Forms Job Ticket) support, the Forms Card now allows users to
specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for
specifying those options.
The LFJT is embedded into the merged PDF by the Forms Card firmware. The PDF is then
parsed by the PDF interpreter inside the printer.
Note: This option requires a printer that supports RFID functionality.
6
Print All Forms
Users can print information about all the formsets stored on the printer, as well as some
printer-specific information. This function is made available in the "Print All Forms" submenu.
The following information is printed for each formset found on the printer:
• Form Name
• Thumbnail picture of first page of formset (if available)
• Formset Location – Describes if the formset is located on the Userflash, printer hard disk
or USB flash drive.
• Page Size
• Orientation
• When the formset was last modified
• Datamap file name
• Paper Tray
• Output Bin
• Project Activation Condition(s)
• Subform(s) used and information including:
– Subform Name
– Subform Datamap file name
– When subform was last modified
Note: If a ppf file exists for the formset then the Paper Tray and Output Bin information is
read from the ppf file and listed under the ppf file name.
7
Vertical Text Centering
Users can now center text objects vertically, eliminating the need to use extra lines within the
text element to push the text downward. The text is aligned within the boundaries of the
object.
Vertical Text Centering is enabled in the Lexmark Forms Manager file.

Data types

The Forms and Bar Code Card accepts three types of data: Text, SAP RDI, and TAGJOB.
Data types
95