Japanese 日本語 - HP Z220 Installation Manual

2.
Connect the power (1) and data (2) cables to the primary (upper) ports on the unit.
Figure 30
3. Connect the opposite end of the data cable to the appropriate connector on the system board or
controller card.
Connect SATA drives to SATA ports, and SAS drives to SAS ports, starting with the lowest-
●
numbered available port.
For HP Z400 and Z600 computers, the blind-mate cables for the internal hard drive bays
●
may require adjustment at the system board, based on the computer drive configuration.
Consult the User Guide or the Maintenance and Service Guide for your computer for
additional information.
4.
To prepare your installed hard drive for operation, see the appropriate hard drive documentation.
5.
Replace the computer bezel and bezel security screw, if applicable.
6.
Reinstall the card support, if applicable.
7.
Reinstall the airflow guide, if applicable.
8.
Reinstall the side access panel.
9. Reconnect all external devices.
10.
Restore power to the computer and all external devices.
Japanese 日本語
This document is available in Japanese. See http://www.hp.com/support/manuals, then select your
product and select Japanese from the drop down Manual Language menu.
このドキュメントは日本語版が用意されています。http://www.hp.com/support/manuals
スし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウン メニューか
ら Japanese を選択してください。
18 CRU Dataport DX115 kit installation
Power and data ports
にアクセ
ENWW