Warnings And Cautions - HP Z210 Series Rack Mounting Instructions

Warnings and cautions

WARNING!
presence of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open
any enclosed area marked with this symbol.
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists.
To reduce the risk of injury from a hot component, enable the surface to cool before touching.
WARNING!
always be lifted by two persons to avoid personal injury due to product weight.
WARNING!
proper workstation setup, posture, health, and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located at
the documentation CD (if one is included with the product).
CAUTION:
beginning these procedures, be sure you discharge static electricity by briefly touching a grounded
metal object.
CAUTION:
(ESD) precautions while performing the system parts removal and replacement procedures:
— Work on a static-free mat.
— Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your
body to the ground.
— Create a common ground for the equipment you are working on by connecting the static-free mat,
static strap, and peripheral units to that piece of equipment.
NOTE:
HP accessories are for use in HP Workstation products. They have been extensively tested for
reliability and are manufactured to high quality standards.
2 Rack mount tray installation
Any surface or area of the equipment marked with this symbol indicates the
To reduce the risk of electric shock or damage to your equipment:
Any surface or area of the equipment marked with this symbol indicates the
If a product is shipped in packaging marked with this symbol,
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes
Static electricity can damage the electronic components of the workstation. Before
To prevent damage to the workstation, observe the following Electrostatic Discharge
, the product must
http://www.hp.com/ergo and on
ENWW