HP Z210 Installation Manual page 12

5. Install one (supplied) M3 x 5mm screw (black) for each DX115 unit for shipping support as
shown.
CAUTION:
drive system.
Figure 18
HP xw6200, xw6400, and xw6600 computers
1. Remove the front bezel from the computer. See
2. Remove and discard the counter-sunk shipping screw at the side of the DX115 case.
Figure 19
3. Gently slide the DX115 unit into the chassis until it locks into place, as shown in the following
figure.
Figure 20
12 CRU Dataport DX115 kit installation
Failure to install the shipping screw might result in damage to the removable hard
Installing the shipping support screw
Removing the shipping screw
Installing the DX115 case
Figure 14 Removing the front bezel on page 10.
ENWW