HP Xw4600 - Workstation - 2 GB RAM Installation Instructions page 4

Hp xw and z series workstations - front fan and fan holder installation

Hide thumbs Also See for Xw4600 - Workstation - 2 GB RAM:

Lower the front fan holder and fan assembly into the chassis and snap it into place. Ensure cables

are routed properly to avoid damage to the cables.

CAUTION:

Figure 1

Plug the front fan connector into the front chassis fan header on the system board.

NOTE:

Table 2

HP xw4000 Workstation series

Front fan and fan holder installation

Clamping a cable between the card guide and the chassis might damage the cable.

Routing the cables

To locate system board components, see the service label on the side access panel.

Installing the front fan and fan holder

400 Workstations

HP xw6000 Workstation series

HP xw9300 Workstations

ENWW

Table of Contents