Download  Print this page

HP Xw4600 - Workstation - 2 GB RAM Installation Manual page 4

Lsi megaraid sas 8888elp host bus adapter
Hide thumbs

Advertisement

Step 2—Installing the SAS RAID controller card
1.
Install the SAS RAID controller card into the selected PCIe expansion slot on the system board.
Ensure that the card is fully seated in the expansion slot.
2.
Close the expansion slot retention clamp to secure the card in the slot.
Figure 2
Installing the SAS RAID controller card
4
LSI MegaRAID® SAS 8888ELP Host Bus Adapter installation
ENWW

Advertisement

loading

  Related Manuals for HP Xw4600 - Workstation - 2 GB RAM