System Board Switches; Bios History; Main Memory - HP Vectra VL800 Handbook

System Board Switches

Switch Default
1 O FF
2 O FF
3 O FF
4 O FF
5 O FF
6
ON
7 OFF
8 O FF
9 OFF
10 OFF

BIOS History

For the latest BIOS, the flasher utility program, and the BIOS history refer to the
HP World Wide Web site. The BIOS is in the form IQ.01.yy.zz
yy= BIOS version number
zz = is the selected language to be downloaded
http://www.hp.com/go/vectrasupport

Main Memory

The HP Vectra vl800 has two pairs of memory sockets for installing either two
or four RAMBUS Direct RAM (RDRAM) memory modules.
Each pair of memory sockets must contain identical memory modules
(identical in size, speed and type). That is, sockets A1 and B1 must contain
identical modules, and sockets A2 and B2 must contain identical modules (or
continuity modules).
If only two RDRAM modules are installed, use the sockets marked A1 and B1 .
The other two sockets ( A2 and B2 ) must contain continuity modules.
Medium-Profile
Desktop PCs
Reserved 1-5. Do Not Change Default Settings.
Disables keyboard power-on
Enables keyboard power-on
Enables normal mode
Enables the BIOS recovery mode at next boot
Retains CMOS memory
Clears CMOS memory at next boot.
Enables User and System Administrator passwords
Clears the passwords at next boot
HP Vectra vl800 Desktop PC
Function
HP Vectra vl800 Desktop PC 1-8
1