Advertisement
Quick Links
Advertisement
Related Manuals for IBM Vectra VEi7
Summary of Contents for IBM Vectra VEi7
- Page 1 IBM Token-Ring 16/4 PCI Adapter Installation Guide...
- Page 2 Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
- Page 3 General information to read before installing General information to read before installing On all systems: before installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
- Page 4 General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
- Page 5 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800 E400...
- Page 6 1 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Windows NT 3.51 Server 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Accept the default Network Protocols and the Primary Network Logon (Client for Microsoft Networks) as seen below and click on “OK”.
- Page 7 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 8 2 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Windows NT 4.0 Server 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Accept the default Network Protocols and the Primary Network Logon (Client for Microsoft Networks) as seen below and click on “OK”. (If you do not have the required information, contact your network administrator) 11 Client for Microsoft Networks...
- Page 9 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 10 3 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 3.12 Server 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Insert the “Novell Client for Windows 95” CD in the CDROM and execute “Setup.exe”.
- Page 11 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 12 4 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 8 Remove the IBM diskette from the floppy drive and click on “YES” to restart the system when prompted. 9 Insert the “Novell Client for Windows 95” CD in the CDROM and execute “Setup.exe”.
- Page 13 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800 E400...
- Page 14 21 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 22 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 23 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 15 • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 16 21 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 22 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 23 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 17 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 18 7 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 3.12 Server 9 Set the path to “A:\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “IBM PCI Token-Ring Adapter Driver” and click on “OK”. 11 With “IBM PCI Token-Ring Adapter Driver”...
- Page 19 Connecting to a Novell NetWare 3.12 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 20 • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11B installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 21 8 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 9 Set the path to “A:\” in the dialog-box and click on “OK”. 10 Choose by highlighting the “IBM PCI Token-Ring Adapter Driver” and click on “OK”. 11 With “IBM PCI Token-Ring Adapter Driver”...
- Page 22 Connecting to a Novell NetWare 4.11 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
- Page 23 • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS transfer protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800 E400...
- Page 24 9 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Windows NT 3.51 Server 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window. 9 From the “Drop Down List”, scroll down and select “<Other>...
- Page 25 • Microsoft Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 26 10 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Windows NT 4.0 Server 9 From the “Drop Down List”, scroll down and select “<Other> Requires disk from manufacturer”, then click on “Continue”. 10 Set the path to “A:\” in the “Insert Disk” dialogs box, and then insert the IBM “PCI Token Ring Adapter NDIS Drivers”...
- Page 27 • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 28 11 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 8 Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window. 9 From the “Drop Down List”, scroll down and select “<Other>...
- Page 29 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 30 12 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Microsoft Windows NT 4.0 Server 9 Select “IBM PCI Token-Ring Adaper, NDIS2/3” in the “Unlisted or Updated Network Adapter” dialog box, and click “OK”. 10 Make sure that the “IBM PCI Token-Ring Adaper, NDIS2/3)” is selected in “Network Drivers”.
- Page 31 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address 1400 D800...
- Page 32 13 Installing the IBM Token-Ring PCI Adapter Connecting to a Novell NetWare 4.11 Server 11 Select option 6 “Highlight here and press <Enter> to install” and press “Enter” to begin installation. 12 When the installation is finished, remove the IBM Token Ring driver disk from the floppy drive and press <CTR><ALT><DEL>...