Replacing The Hard Drive - HP Presario CQ42-100 - Notebook PC User Manual

Notebook pc
Hide thumbs Also See for Presario CQ42-100 - Notebook PC:
Table of Contents

Advertisement

Replacing the hard drive

CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
To remove the hard drive:
1.
Save your work.
2.
Shut down the computer and close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface.
6.
Remove the battery from the computer.
7.
With the hard drive bay toward you, loosen the 2 hard drive cover screws (1).
8.
Lift the hard drive cover away from the computer (2).
76
Chapter 6 Drives
To prevent information loss or an unresponsive system:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G42-100 - notebook pc

Table of Contents