Specifications - Sony BDP-S1100 Operating Instructions Manual

Message Code 1 [Playback stopped.
The content being played is protected
by Cinavia and is not authorized for
playback on this device. For more
information, see http://
www.cinavia.com. Message Code 1]
appears on the screen when playing a
disc.
, The audio track of the video that you
are playing contains a Cinavia code
indicating it was intended for
presentation using professional
equipment only and is not authorized
for playback by consumers (page 5).
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following:
off, and disconnect the AC power cord.
Reconnect the AC power cord while
2
pressing down Z on the player.
Keep pressing down Z on the player
3
until the tray opens.
Hold down [/1 on the player
disc.
5
for more than 10 seconds until the
player turns off.
The player does not respond to any
button.
, Moisture has condensed inside the
player (page 4).
, Hold down [/1 on the player for more
than 10 seconds until the player turns
off.
If the player still does not respond to
any button, disconnect then reconnect
the AC power cord.
Turn the player
1
Remove the
4

Specifications

System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load
impedance)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A, maximum current
500 mA (For connecting USB device)
General
Power requirements:
120 V AC, 60 Hz
Power consumption: 8.8 W
Dimensions (approx.):
290 mm × 199 mm × 43 mm
(11 1 / in. × 7 7 /
2 8
(width/depth/height)
incl. projecting parts
Mass (approx.): 1.1 kg (2 lb 7 oz)
Operating temperature:
5 ºC to 35 ºC (41 °F to 95 °F)
Operating humidity:
25 % to 80 %
Supplied accessories
See page 12.
Specifications and design are subject to
change without notice.
in. × 1 3 / in.)
4
29