Download Print this page

Product Specifications; Troubleshooting - Philips HTL2151/F7 User Manual

Philips soundbar speaker htl2151
Hide thumbs

Advertisement

6 Product
specifications
Note
Specifications and design are subject to change without
notice.
Audio
S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Main unit
Power supply: 110-240 V~, 50 Hz - 60 Hz
Power consumption: 30 W
Standby power consumption: ≤ 0.5 W
Speaker impedance: 6 ohm (Tweeter), 4
ohm (Woofer)
Frequency response: 160 Hz-20 kHz
Dimensions (WxHxD): 800 x 75.6 x 52.4
mm
Weight: 3.84 kg
USB
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
File system: FAT16 and FAT32
Supports MP3 and WMA file formats
Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
Version:
• WMA: V7, V8, V9
EN
10
Amplifier
Total output power: 40W RMS (+/- 0.5 dB,
10% THD)
Frequency response: 20 Hz-20 kHz / ±3
dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Input sensitivity:
• AUX: 2 V
• AUDIO-IN: 1V
Subwoofer
Impedance: 8 ohm
Speaker drivers: 130 mm (5.25") woofer
Frequency response: 20 Hz-150 Hz
Dimensions (WxHxD): 165 x 240 x 295
mm
Weight: 2.6 kg
Cable length: 3 m
Remote control batteries
1 x AAA-R03-1.5 V

7 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Main unit
The buttons on the SoundBar do not work.
Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Sound
No sound from SoundBar speakers.
Connect the audio cable from your
SoundBar to your TV or other devices.
Reset your SoundBar to its factory settings.
On the remote control, select the correct
audio input.
Make sure that the SoundBar is not muted.
Distorted sound or echo.
If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
EN
11

Hide quick links:

Advertisement

loading