Download Print this page

Use Your Soundbar; Adjust The Volume; Choose Your Sound; Mp3 Player - Philips HTL2151/F7 User Manual

Philips soundbar speaker htl2151
Hide thumbs

Advertisement

• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on the TV or
other device.
DVD
EN
6
4 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
Make the necessary connections described
in the quick start guide or download
the user manual from www.philips.com/
support.
Switch the SoundBar to the correct source
for other devices.

Adjust the volume

1
Press +/- to increase or decrease a volume
level.
• To mute sound, press
(MUTE).
• To restore the sound, press
(MUTE)
again or press +/-.
» All Source indicators on the main unit
blink twice when a volume is set to the
maximum or minimum value.

Choose your sound

This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR to select a surround mode.
• [Virtual Surround]: Creates a highly
surround listening experience The
SURR indicator on the main unit lights
up.
• [Stereo]: Two-channel stereo sound.
Ideal for listening to music.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
• Press RESET to reset your treble/
bass level to the default settings
programmed at the factory.
» All Source indicators on the main unit
blink twice when treble or bass is set
to the maximum or minimum value.

MP3 player

Connect your MP3 player to play your audio
files or music.
What you need
An MP3 player.
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
2
Press AUDIO-IN.
3
Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
A USB storage device that is formatted
for FAT file systems, and complies with the
Mass Storage Class.
An MP3 or WMA file on a USB storage
device
1
Connect a USB storage device to the
SoundBar.
2
Press USB on the remote control.
» The play starts after a few seconds.
EN
7

Hide quick links:

Advertisement

loading