Changing The Tv Recording Path To The Local Hard Disk Drive; Disconnecting The Hp Personal Media Drive Safely - HP s7600n - Pavilion Media Center Software Manual

Changing the TV recording path to the local hard disk drive

To change the Media Center TV recording path to
your local hard disk drive:
1
Open Media Center.
2
Select Settings, TV, Recorder, and then
Recorder storage. You can also set the disk
allocation and recording quality settings in
this window.

Disconnecting the HP Personal Media Drive Safely

You can safely remove the drive when it is not
active. When the amber activity light is blinking, the
drive is active, saving or transferring data.
Removing the drive while the light is blinking may
cause data loss or damaged files.
To disconnect your HP Personal Drive safely:
1
Close Media Center and all other programs
that may be accessing your HP Personal
Media Drive. Make sure the activity LED is off.
2
Double-click the Safely Remove
Hardware icon in the system tray at
the bottom of the desktop. If this icon is
hidden, click the arrows on the taskbar to
display it. The Safely Remove Hardware
window opens.
3
Double-click USB Mass Storage Device to
locate your HP Personal Media Drive. USB
Mass Storage Device may be listed twice.
One may contain a memory card reader or
other mass storage drives.
3
Select your local hard disk drive (C:).
4
Click Save, and then click Yes.
5
Close Media Center.
6
Restart the HP Media Center PC.
4
Select your device that is labeled HP Personal
Media Drive, and then click OK. This name of
the drive may appear as Generic Volume
followed by the assigned drive letter. A Safe
to Remove Hardware message appears in the
system tray at the bottom of your desktop,
letting you know that your drive is safe to
disconnect.
5
Click Close.
6
Disconnect the drive from the HP Media
Center PC.
Using an HP Personal Media Drive
115