9.
Lift the computer so that its right side is facing down (1) and place it on the stand (2). Be sure that
the arrow on the stand is pointing toward the front of the computer.
Figure 2-1
10.
Reconnect the power cord and any external devices, then turn on the computer.
11.
Lock any security devices that were disengaged when the computer cover was removed.
CAUTION:
prevent the computer from falling on its side and damaging the unit.
NOTE:
The front should be 100% open. Leave a 10-cm (3.93-inch) clearance on the sides and top of
the computer and at least a 50-cm (19.69-inch) clearance in the rear. The rear vents should be 100%
open.
ENWW
Changing from Desktop to Tower Orientation
Do not place the computer on its side without the tower stand. The stand is required to
Using the Computer in a Tower Orientation
9