Connecting the TV Signal Source When You Have an
Advanced Setup Guide (features vary by model)
This section describes how to connect the computer to an existing setup for the TV
Wall to VCR to TV, using coaxial cable
Disconnect the coaxial cable from the input to the VCR, and connect it to the input of a
coaxial cable signal splitter (not included; available at electronics stores).
Connect two coaxial cables to the splitter outputs.
Connect one of these cables to the input of the VCR, and the other cable to the TV
connector on the back of the computer.
Setting up the computer with a splitter
TV In on back of