Replacing The Keyboard - Lenovo K100 Hardware Maintenance Manual

Hardware Maintenance Manual

Replacing the keyboard

40
6. Pull on the tips of the rubber mounts until the fan assembly is in place.
7. Connect the system fan assembly cable to the system fan connector on
the system board.
8. Refer to the "Completing the installation".
Attention
Do not remove the computer cover or attempt any repair before
reading the "Safety information" .
To replace the keyboard:
1. Remove any media (diskettes, CDs, or tapes) from the drives, shut
down your operating system, and turn off all attached devices and the
computer.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard.
Note: Your keyboard might be connected to the standard keyboard