Setup Menu; Setting The Time Media.p; Using The Sleep Timer; Setting The On/Off Time - Samsung LN32C450E1GXZA User Manual

speaker select
(External speaker / TV speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External speaker.
✎
When speaker select is set to External speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When speaker select is set to External speaker, you
should use these settings.
x
TV speaker: Off, External speaker: On
✎
When speaker select is set to TV speaker, you
should use these settings.
x
TV speaker: On, External speaker: On
✎
If there is no video signal, both speakers will be mute.
sPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Audio Format: During the reception of a digital TV
■
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay : Correct audio-video sync problems, when
■
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
sound Reset
Reset all sound settings to the factory defaults.

Setup Menu

setting the Time
¦
O
m → setup → Time → EnTERE
MEnU
Time
✎
The current time will appear every time you press the
button.
InFO
Clock : Setting the clock is for using various timer
■
features of the TV.
✎
If you disconnect the power cord, you have to set
the clock again.
POWER
P
Clock Mode: Set up the current time manually or
automatically.
– : Set the current time automatically using the
Auto
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
– Manual : Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock set: Set the Month, Day, Year, hour, Minute
and am/pm.
MEDIA.P
✎
Available only when
Manual.
✎
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
DsT (Off / On): Switches the DST(Daylight Saving Time)
function on or off.
✎
This function is only available when the
Mode is set to Auto.
Time Zone: Select your time zone.
✎
This function is only available when the
Mode is set to Auto.

Using the sleep Timer

¦
O
m → setup → Time → sleep Timer →
MEnU
EnTERE
sleep Timer
■
S.MODE
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).
✎
To cancel the
Off.

setting the On/Off Time

¦
O
MEnU m → setup → Time → Timer 1 →
EnTERE
Timer 1 / Timer 2 / Timer 3
■
timer settings can be made. You must set the clock first.
On Time
▲
Inactivate
▼
Off Time
Inactivate
Volume
10
Repeat
Once
Clock Mode is set to
t
: Automatically
P.MODE
sleep Timer, select
: Three different on / off
Timer 1
12 00
12 00
Source Antenna Channel
TV Air
Sun Mon Tue Wed Thu Fri
L Move U Adjust E Enter R Return
English
Clock
Clock
SLEEP
am
am
3
Sat
17