Replacing The Battery - HP Brio ba600 User Manual

Replacing the Battery

Replacing the Battery

There is a danger of explosion if the battery is incorrectly installed. For your safety, never
attempt to recharge, disassemble or burn the old battery. Replace the battery only with
the same or equivalent type recommended by the manufacturer. The battery in this PC is
a lithium battery which does not contain heavy metals, nevertheless, in order to protect
Warning
the environment, do not dispose of batteries in household waste. Please return used
batteries to the shop from which you bought them, or to the dealer from which you
purchased your PC, or to HP, so that they can either be recycled or disposed of in an
environmentally sound way. Returned used batteries will be accepted free of charge.
1 Remove the cover. Refer to page 44.
2 Lay the PC on its side to gain access to the system board.
Brio BA400 PC
Remove the old battery by pressing the retaining clip with a flat-headed
3
screwdriver and lifting the battery clear of the battery holder
4 Place the new battery in the battery holder, with the "+" sign on top and ensure that
it is properly seated.
5 Replace the PC's cover. Refer to page 45.
62
Position of battery
Brio BA600 PC
.