Replacing a Pentium Processor (BA600 PCs)
Caution
For your safety, disconnect the power cord and all external cables.
1 Remove the cover. Refer to page 44.
2 Open the side panel of the PC and lay the system board flat. Refer to "Removing the
Side Panel for Easy Access to System Board Components" on page 46.
3 Remove the old processor.
a Using your nail, pull the retaining tab on one side of the socket outwards to
release the processor on one side.
b Open the retaining tab on the other side and lift the processor out.
retaining tab
4 Install the new processor. Align the processor carefully above the slot, then push
the processor down firmly until it clicks into place.
5 Refer to page 48 for instructions on reinstalling the system board in your PC.
6 Replace the PC's cover. Refer to page 45.
Replacing a Pentium Processor (BA600 PCs)
51