Replacing The Cpu - Lenovo IdeaCentre K305 Hardware Replacement Manual

Lenovo ideacentre k3 series hardware replacement guide v1.0
Hide thumbs Also See for IdeaCentre K305:
Table of Contents

Advertisement

Replacing the CPU

Attention:
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://consumersupport.lenovo.com
To replace an CPU
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Remove the front bezel. Refer to "Removing the front bezel".
3. Remove the system board. Refer to "Replacing the heat sink assembly".
4. Remove the heat sink and fan assembly. Refer to "Replacing the heat sink
assembly".
5. To remove the microprocessor
and open the retainer
Important:
Do not touch the gold contacts on the bottom of the microprocessor. When
handling the microprocessor, touch only the sides.

Hardware Replacement Guide
31037823_K3_HRG_EN_V1.0.indd 26
from the system board, lift the small handle
.
2009.8.4 4:44:49 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K300 - ideacentre - 5316Ideacentre k3

Table of Contents