Ibm Global Network Dialer; When Transferring A File Using The Infrared Device At 4 Mbps From A Computer Running Windows Me To Computer Running Windows 98, The File Transfer Fails; Ring Central Sometimes Fails To Receive The File After Wake Up From Ri; Upgrade And Installation Issues - Lenovo ThinkPad i Series 1200 Installation Manual

Windows millennium edition install & upgrade set up and technical guide
Hide thumbs Also See for ThinkPad i Series 1200:
Table of Contents

Advertisement

6.3

IBM Global Network Dialer

Models:
Issue:
Cause:
Resolution:
6.4
When transferring a file using the Infrared device at 4 Mbps from a computer
running Windows Me to computer running Windows 98, the file transfer fails
Models:
Issue:
Cause:
Resolution:
6.5

Ring Central sometimes fails to receive the file after wake up from RI.

Models:
Issue:
Cause:
Resolution:
7

Upgrade and installation Issues

7.1

Touching Trackpoint causes a hang during clean install

Models:
Issue:
ThinkPad 240, i Series 2621-
420,42U,421,441,460,46U,480,48U,540,541,560
Not supported
Windows Me comes with a software Dial-up Networking which can
be used for dial up connection instead of IBM Global Network Dialer.
1. Click Start → Settings →Dial Up Networking
2. Dial Up Networking Wizard will guide you through rest of the
setup.
All ThinkPad models
When transferring a file using the Infrared device at 4Mbps from a
computer running Windows Me to a computer running Windows 98,
the file transfer fails.
This is Windows98 issue.
If using the Infrared device to transfer files between computers
running Windows 98, and Windows Me set the connection rate
between the communicating computers to 115 kbps:
1. Click Start → Settings → Control Panel
2. Double-click Network icon
3. Click IBM ThinkPad Fast Infrared Port
4. Click "Properties"
5. Click "Advanced" tab
6. Click "Maximum Connect Rate" in the Property window
7. Click "115,200bps" in the Value window
8. Click [OK]
9. Click [OK]
10. Click [Yes] to reboot the system
i S
ThinkPad
eries 1400 2611-410/450/411/451
Ring Central sometimes fails to receive a file after resuming from
Standby from an incoming call. The system can wake up but Ring
Central does not change Receiving mode.
Ring Central is not completely compatible with Windows Me.
Do not use RingCental with WOR function under Windows Me.
ThinkPad 240
During clean install, Setup will hang when excessive movement is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents