Closing The Computer; Replacing The Drive Cage - HP Pavilion xt800 - Desktop PC Manual

1 Replace any cards that you removed, and
then replace the add-in card bracket.
2 Replace the drive cage, fan duct, and side
panel (see "Closing the Computer" on
page 20).
3 Reconnect the power cord and all other
cables.
4 Reconnect the modem/phone cable.
5 Turn on the computer and all peripherals.
6 Run the BIOS Setup program to reset the
date and time. (See "Using the BIOS Setup
Program" in the User's Guide.)

Closing the Computer

After you have finished installing memory or
drives, inserting or replacing add-in cards, or
changing the battery, you need to replace the
drive cage, the fan duct, and the side panel.

Replacing the Drive Cage

1 Holding the drive cage at a 45-degree
angle, slide the two nubs (A) on the drive
cage into the guides (B) on the chassis.
Note:
The second nub (A) is on the other side of the
drive cage (not pictured).