Smx_Pcicard - HP BL685c - ProLiant - 4 GB RAM Datasheet

Table 3-2
Class: SMX_PCIDevice
Property name
ClassCode
DomainNumber
BusNumber
DeviceNumber
FunctionNumber
PCIDeviceID
RevisionID
SubsystemID
SubsystemVendorID
VendorID
SubClassCode

SMX_PCICard

3-3-2
SMX_PCICard is used to represent physical PCI adapter card installed on HP Servers. There is an
instance of this class for each PCI adapter card present in the system.
Property implementation
The basic function of the PCI device - some code other
than 6 (Bridge). Valid values include but are not limited
to:
•
1 (Mass Storage)
•
2 (Network)
•
3 (Display)
•
4 (Multimedia)
•
5 (Memory)
•
8 (Base Peripheral)
•
9 (Input)
•
11 (Processor)
•
12 (Serial Bus)
CIM_PCIDevice
The domain/segment number where this PCI device
resides.
The bus number where this PCI device resides
The device number assigned to this PCI device for the
bus
The function number for this PCI device
PCI device ID as described in the configuration
registers for this PCI device
Revision ID as described in the configuration registers
for this PCI device
Subsystem ID as described in the configuration
registers for this PCI device
Subsystem Vendor ID as described in the configuration
registers for this PCI device
Vendor ID as described in the configuration registers
for this PCI device
HP_PCIDevice
SMX_PCIDevice
The basic sub-function of the PCI device. The value of
the property is interpreted based on the value of the
ClassCode byte.
PCI Device Provider 38