HP BL685c - ProLiant - 4 GB RAM Datasheet page 253

Table 12-4
Class: SMX_MemoryModule
Property name
IsSpeedInMhz
Capacity
TotalWidth
Speed
MaxMemorySpeed
MemoryType
PositionInRow
FormFactor
BankLabel
Spd
Table 12-5
Memory Module Status
Condition
Memory module status is unknown
Memory module is operating
properly
Memory module is present but is not
currently used by the operating
system
Property implementation
The IsSpeedInMHz property is used to indicate if the
Speed property or the MaxMemorySpeed contains the
value of the memory speed. A value of TRUE shall
indicate that the speed is represented by the
MaxMemorySpeed property.A value of FALSE shall
indicate that the speed is represented by the Speed
property.
Total capacity of memory module in bytes
Total width of memory module in bits
Speed of memory module in nanoseconds. Speed is set
to 0 if the propert is IsSpeedInMhz=TRUE
The maximum speed in MHz of PhysicalMemory
Enumerator indicating the type of memory module. See
the MOF file for details.
Position of memory module in a row. This property is
conditional, it is populated if the data is available.
Enumerator indicating the form factor of the memory
module. See the MOF file for details.
String identifying the physically labeled bank where
the memory is located. This property is conditional. It is
populated if the data is available.
SMX_MemoryModule
An array that contains raw Serial Presence Detect
information for the memory module. Each array
element contains a byte of the Spd.
This property is conditional; it is populated if the data
is available.
OperationalStatus[0]
StatusDescriptions[0]
0 (Unknown)
Unknown
2 (OK)
OK
2 (OK)
OK
OperationalStatus[1]
StatusDescriptions[1]
<not populated>
<not populated>
<not populated>
<not populated>
15 (Dormant)
Memory module status: Memory
present but not in use
System memory 253