Tcp/Ip Offload Engine; Receive-Side Scaling (Rss); Iscsi Acceleration; Iscsi Boot For Linux - HP BL680c - ProLiant - G5 Configuration

Technologies in hp proliant g5 c-class server blades
Hide thumbs Also See for BL680c - ProLiant - G5:
Table of Contents

Advertisement

• iSCSI boot for Linux® makes it possible to boot the server from a storage area network (SAN) and
eliminates the need for disk drives in a server.
• HP Virtual Connect (VC) and Flex 10 provide up to 16 FlexNICs across 4 ports to simplify server
connection setup and administration.
For complete specifications about HP network adapter products, go to
www.hp.com/go/ProLiantNICs.

TCP/IP Offload Engine

The increased bandwidth of Gigabit Ethernet networks increases demand for CPU cycles to manage
the network protocol stack. This means that performance of even a fast CPU will degrade while
simultaneously processing application instructions and transferring data to or from the network.
Computers most susceptible to this problem are application servers, web servers, and file servers that
have many of concurrent connections.
The ProLiant TCP/IP Offload Engine for Windows speeds up network-intensive applications by
offloading TCP/IP-related tasks from the processors onto the network adapter. TOE network adapters
have on-board logic to process common and repetitive tasks of TCP/IP network traffic. This effectively
eliminates the need for the CPU to segment and reassemble network data packets. Eliminating this
work significantly increases the application performance of servers attached to gigabit Ethernet
networks.
TOE is included on integrated Multifunction Gigabit Ethernet adapters and optional multifunction
mezzanine cards. It is supported on Microsoft Windows Server 2003 when the Scalable Networking
Pack is installed. With the delivery of Windows Server 2008, the TCP/IP Offload Chimney that
shipped in the Scalable Networking Pack is included as part of the latest Windows operating system.

Receive-side Scaling (RSS)

RSS balances incoming short-lived traffic across multiple processors while preserving ordered packet
delivery. Additionally, RSS dynamically adjusts incoming traffic as the system load varies. As a result,
any application with heavy network traffic running on a multi-processor server will benefit. RSS is
independent of the number of connections, so it scales well. This makes RSS particularly valuable to
web servers and file servers handling heavy loads of short-lived traffic.
For RSS support on servers running Windows Server 2003, Scalable Networking Pack must be
installed. Windows Server 2008 supports RSS as part of the operating system.

iSCSI Acceleration

Accelerated iSCSI offloads the iSCSI function to the NIC rather than taxing the server CPU.
Accelerated iSCSI is enabled by the HP ProLiant Essentials Accelerated iSCSI Pack that is used with
certain embedded Multifunction NICs in Windows and Linux® environments.

iSCSI boot for Linux

iSCSI boot for Linux is available on BladeSystem NC370i, NC373i, and NC737m Gigabit Ethernet
adapters. iSCSI boot allows the host server to boot from a remote OS image located on a SAN within
a Red Hat or SUSE Linux environment. The host server uses an iSCSI firmware image (iSCSI boot
option ROM), making the remote disk drive appear to be a local, bootable C: drive. Administrators
can configure the server to connect to and boot from the iSCSI target disk on the network. It then
downloads the OS image from the iSCSI target disk. The HP iSCSI boot solution also includes scripts
to significantly simplify the installation process. Adding an iSCSI HBA card is not required.
12

Advertisement

Table of Contents
loading

Table of Contents