Asus CP6230 User Manual page 47

Select Broadband (PPPoE) and click
9.
Next.
10. Enter your User name and,
Password, and Connection name.
Click Connect.
Click Close to finish the
11.
configuration.
1. Click the network icon in the taskbar
and click the connection you just
created.
13. Enter your user name and password.
Click Connect to connect to the
Internet.
Configuring a static IP network connection
To configure a static IP network connection:
Repeat steps 1 to 4 of the previous section Configuring a dynamic IP/PPPoE
1.
network connection.
Click Use the following IP address.

3. Enter the IP address, Subnet mask and
Gateway from your service provider.
4. If needed, enter the preferred DNS Server
address and alternative address.
When done, click OK.
5.
ASUS CP630 47