Expert Color Tools - Xerox 6180N - Phaser Color Laser Printer Color Management Manual

Expert color tools

Color Management Guide
Figure 4-5. User TRC setup window
Create User TRCs to make and save color adjustments that can
be applied to jobs. The creation of User TRCs should be
performed by users with a high level of color knowledge.
For example, create a TRC that compensates for jobs submitted
from a specific device that generates a consistent magenta tint.
A TRC adjusting for that tint could be created and applied to
every job submitted from that device. This saves job preparation
time and assures that the same adjustment is made to all jobs
submitted from that device.
Skilled users employ expert color tools for high level color
adjustments. Users select source and destination color profiles
to be used in conversion to engine CMYK.
Usage of the expert color tools is dependent upon your color
requirements. You can use these tools to improve color quality.
• Source color allows you to select RGB, CMYK and Gray
input color profile for the image, on an object-type basis.
Using color tools
4-5