Print As Grayscale; Spot Color Editor - Xerox 6180N - Phaser Color Laser Printer Color Management Manual

DocuSP color management

Print as grayscale

Spot color editor

2-12
NOTE: These image resample methods are detailed in
Chapter 4: Using Color Tools.
– Output
Destination Profiles convert PCS to CMYK.
There are pre-defined destination profiles for GCR
(Gray Component Replacement). GCR replaces
equivalent percentages of the gray component for
colors (CMY), replacing the gray with black. This
conserves dry ink and prevents dry ink buildup.
Emulation can be selected in place of destination
profiles allowing you to select a color profile that
emulates a specific type of output profile for media or a
printing device.
Rendering intent provides color mapping options.
The available rendering intents are covered in detail in
Chapter 4: Using Color Tools and are as follows:
Saturation
Perceptual
Relative Colorimetric
Absolute Colorimetric
Pure
Print as grayscale converts color content to gray. Refer to on-line
help for the details, as well as for information on billing.
DocuSP has a built-in color lookup table to map incoming spot
color (PANTONE® Coated or Uncoated) to the matching
PANTONE® color created in DocuSP CMYK. If the PostScript or
PDF file contains Uncoated, Process or ProSim color, the CMYK
color representation is created using the color values in the
PostScript file.
The Spot Color Editor is provided allowing you to change the
standard DocuSP output for each PANTONE® color.
Color Management Guide