General Setup; Paper Settings; Paper Type; Paper Size - Brother DCP-9040CN User Manual

3

General setup

Paper settings

Paper type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Do one of the following:
To set the paper type for the
MP Tray press Menu, 1, 1, 1.
To set the paper type for Tray#1
press Menu, 1, 1, 2.
Paper Type
1.MP Tray
b
Press a or b to choose Thin, Plain or
Recycled Paper for Tray#1.
Choose Thin, Plain, Thick,
Thicker or Recycled Paper for
MP Tray.
Press OK.
c
Press Stop/Exit.

Paper size

3
You can use nine sizes of paper for copying:
Letter, Legal, Executive, A4, A5, A6, B5, B6
3
and Folio.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document on the page.
a
Do one of the following:
To set the paper size for the
MP Tray press Menu, 1, 2, 1.
To set the paper size for Tray#1
press Menu, 1, 2, 2.
Paper Size
1.MP Tray
b
Press a or b to choose A4, Letter,
Legal, Executive, A5, A6, B5, B6,
Folio or Any.
Press OK.
c
Press Stop/Exit.
Note
• Any (size) appears only when you choose
the MP tray (Menu, 1, 2, 1).
• If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting.
• You cannot use the Any Paper Size
selection for the MP tray when making N
in 1 copies. You must choose one of the
other available Paper Size selections for
the MP tray.
3
3
3
21