Owner's Record - LG 272 Owner's Manual

Specific Absorption Rate (SAR) for Wireless
Phones
The SAR is a value that corresponds to the relative amount
of RF energy absorbed in the head of a user of a wireless
handset.
The SAR value of a phone is the result of an extensive
testing, measuring and calculation process. It does not
represent how much RF the phone emits. All phone
models are tested at their highest value in strict laboratory
settings. But when in operation, the SAR of a phone can be
substantially less than the level reported to the FCC. This is
because of a variety of factors including its proximity to a
base station antenna, phone design and other factors. What
is important to remember is that each phone meets strict
federal guidelines. Variations in SARs do not represent a
variation in safety.
All phones must meet the federal standard, which
incorporates a substantial margin of safety. As stated
above, variations in SAR values between different model
phones do not mean variations in safety. SAR values at or
below the federal standard of 0.0 W/kg are considered safe
for use by the public.
The highest reported SAR values of the RUMOR Reflex are:
Cellular CDMA mode:
Part22 Head: 0.54 W/kg; Body: 0.85 W/kg
Part24 Head: 1.15W/kg; Body: 0.66W/kg
Part90 Head: 0.50W/kg; Body: 0.79W/kg
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission
Guidelines.
FCC ID number: ZNFLN272.
More information on the phone's SAR can be found from
the following FCC Web site:
http://www.fcc.gov/oet/fccid.

Owner's Record

The model number, regulatory number and serial number
are located on a nameplate inside the battery
compartment. Record the serial number in the space
provided below. This will be helpful if you need to contact
us about your phone in the future.
Model: RUMOR Reflex by LG
Serial No.:
Section 4A: Important Safety Information
®
95