Ic Card Information Setting Function; Registering Information From The Control Panel - Konica Minolta bizhub C35 User Manual

Security operations user guide

Hide thumbs Also See for bizhub C35:

Table of Contents

2.7

IC card information Setting Function

2.7

IC card information Setting Function

When access to the machine by the Administrator of the machine through the Admin Settings is authenticat-

ed, the machine enables setting of the operation of the IC card information.

The machine allows authentication using an IC card, in addition to that based on entry of a user name and a

user password. To use the IC card function, it is necessary to register user IC card information in the machine.

Any user whose IC card information has been registered can log onto the machine through user authentica-

tion using the IC card.

There is a choice of either of the following two methods for registering the IC card information.

Connect the IC card reader to the machine and register information directly in the machine.

Connect the IC card reader to the PC of the Administrator of the machine and register information by

using PageScope Data Administrator.

For details of how to register information by using PageScope Data Administrator, see page 4-10.

NOTICE

The Administrator must first make User Authentication and Authentication Device settings before registering

the IC card information. For details of the User Authentication and Authentication Device settings, see

page 2-9.

For the procedure to call the Admin Settings on the display, see page 2-2.

Do not leave the machine with the setting screen of Admin Settings left shown on the display. If it is

absolutely necessary to leave the machine, be sure first to log off from the Admin Settings.

Call the Admin Settings on the display from the control panel.

Touch [Authentication Setting].

Touch [Card Authentication].

bizhub C35

2-18

Table of Contents

Show Quick Links

Table of Contents